
Trials riding is one of the most demanding forms of off-road motorcycle riding. Unlike high-speed motocross or general trail riding, trials riding depends on balance, traction management, throttle precision, braking control, suspension response, and the rider’s ability to move the motorcycle accurately through difficult obstacles. Rocks, steps, steep slopes, narrow tracks, logs, loose ground, and low-speed turns all require a motorcycle that responds predictably and remains manageable when momentum is limited.
The FR2000 150cc/190cc Gas Trials Bike for Advanced Riders is designed around these requirements. It is a gasoline-powered trials motorcycle for advanced riders, professional training centers, off-road clubs, mountain camps, commercial riding venues, and distributors seeking a specialized technical riding product. Available with either a 150cc or 190cc single-cylinder four-stroke air-cooled engine, the FR2000 combines low-speed power delivery with a five-speed transmission, adjustable suspension, hydraulic disc brakes, a short trials-focused chassis, and 21-inch front and rear trials tires.
Rather than being a conventional dirt bike with cosmetic changes, the FR2000 is configured for a different style of riding. Its purpose is not simply to achieve maximum speed. Its purpose is to help the rider maintain control, position the motorcycle accurately, and manage power through technical terrain. This makes it a practical platform for structured training, skills development, club activities, rental fleets, and advanced recreational use.
The motorcycle is manufactured by Zhejiang Kukaqi Industry & Trade Co., Ltd., a Chinese off-road motorcycle producer operating under the Xmotos brand. The company provides OEM and ODM services and maintains in-house capabilities for frame production, plastic body components, powder coating, assembly, testing, and quality inspection. These capabilities support product consistency, customization, and B2B supply requirements.
Trials motorcycles operate in a narrow but highly specialized performance range. Riders often need to travel at very low speeds while maintaining balance and traction. They may need to approach an obstacle slowly, apply controlled throttle, unload or load the suspension, lift the front wheel, reposition the motorcycle, or make a tight change of direction without excessive wheelspin. A motorcycle that is optimized only for speed may be difficult to control in these situations.
The FR2000 addresses this challenge through a low-speed power setup and a compact chassis. The 150cc and 190cc engine options give buyers the ability to select a configuration that matches the intended application. The 150cc version can be appropriate for riders and training environments that prefer manageable power, while the 190cc version offers a larger displacement platform for riders seeking stronger low-speed torque and additional performance capacity.
The motorcycle’s five-speed transmission gives the rider flexibility across different sections of a course or trail. Lower gears can support slow obstacle approaches and controlled climbs, while higher gears can be used when the route opens into faster connecting sections. The transmission also helps training centers teach gear selection as part of a complete technical riding program.
A hydraulic clutch is included in the supplied configuration. For advanced trials riding, clutch modulation can be as important as throttle control. A rider may use the clutch to smooth power delivery, maintain engine response at low speed, or make a controlled transition when climbing an obstacle. The combination of a five-speed transmission and lightweight hydraulic clutch provides a more precise interface between the engine and rear wheel.
The FR2000 is therefore not intended to compete only through engine output. Its value comes from the coordination of engine response, chassis dimensions, suspension, braking, wheels, tires, and protective components. The motorcycle is built to help the rider manage the entire riding process rather than focus on one isolated specification.
The FR2000 uses a single-cylinder, four-stroke, air-cooled gasoline engine. Buyers can select a 150cc or 190cc displacement according to rider experience, terrain, fleet requirements, and local market preference. Both configurations are designed for low-speed off-road riding and technical obstacle work.
The 150cc engine option offers a practical balance between usable power, manageable response, and operating simplicity. It can be suitable for advanced training programs, recreational trials riding, and customers who want a technical motorcycle without selecting the largest available displacement. In a training environment, the 150cc version may also make it easier for instructors to introduce riders to throttle, clutch, and balance techniques before moving them to a higher-output model.
The 190cc engine option provides a larger displacement platform for applications that require additional low-speed torque. This can be useful when the motorcycle is used on steeper terrain, over larger obstacles, or by heavier and more experienced riders. The additional displacement can also provide a broader performance margin for commercial venues that need one platform to serve different rider abilities.
Both engine choices use air cooling. Air-cooled engines have a relatively straightforward structure and do not require a liquid radiator, coolant pump, or radiator maintenance system. This can be beneficial for off-road applications where the motorcycle may operate in remote locations, training centers, mountain camps, or rental venues. The final engine specification, carburetion or fuel system details, emissions configuration, and market compliance should be confirmed before ordering.
The engine platform is also relevant to B2B buyers because displacement selection can support product segmentation. A distributor may market the 150cc version as an advanced training and recreational model while positioning the 190cc version toward experienced riders, clubs, and commercial obstacle parks. Offering both versions on the same basic platform can simplify product planning, spare-parts preparation, and service training.
The FR2000 uses a lightweight high-strength steel tube frame. A steel tube frame is well suited to off-road production because it can provide a useful combination of strength, repairability, manufacturability, and controlled flex. For a trials motorcycle, the frame must tolerate repeated impacts and uneven loading while remaining predictable when the rider shifts body position.
The short chassis contributes to the motorcycle’s technical riding character. A compact motorcycle can be easier to maneuver in tight sections, reposition around obstacles, and control during low-speed direction changes. It can also help the rider make rapid body-position adjustments when climbing, descending, or balancing over uneven ground.
The chassis is supported by a full-coverage skid plate, hand guards, engine heat protection, and a fully enclosed chain guard in the stated configuration. These components are important for training centers and commercial venues because motorcycles used repeatedly by different riders may encounter frequent contact with rocks, branches, steps, and other obstacles.
A skid plate helps shield the lower engine and frame area from impacts and scraping. Hand guards help protect the rider’s hands and handlebar controls from branches, falls, and side impacts. Engine heat protection can improve rider and component protection during slow-speed operation, while an enclosed chain guard adds safety and helps reduce exposure to the moving chain in training and rental environments.
Compared with a basic recreational motorcycle without these features, the FR2000 is more closely aligned with the operating conditions of structured trials riding. The protective equipment may also reduce downtime and component damage in fleet use, although regular inspection remains necessary after demanding riding sessions.
Suspension performance is central to trials riding. The motorcycle must absorb impacts while keeping the tires connected to the ground. It must also respond to weight transfer when the rider approaches an obstacle, loads the front or rear suspension, or changes body position on a slope.
The FR2000 uses Fastace adjustable front forks and a rear center monoshock. The adjustable front fork allows the setup to be adapted to rider weight, terrain conditions, riding style, and training requirements. A professional rider practicing on hard rocks may prefer a different response from a recreational rider operating on softer soil or a commercial venue with mixed terrain.
The rear center monoshock contributes to the compact trials-oriented chassis layout. Central rear suspension can help manage rear-wheel loading and provide a consistent platform for climbing, landing, and slow-speed obstacle work. The final suspension settings should be established according to the rider, tire pressure, obstacle design, and operating environment.
Adjustability is a particular advantage for B2B customers. A single fixed suspension setup may be adequate for one rider or one terrain type, but a training center may serve users with different weights and skill levels. A club may operate on both natural and constructed obstacles. A rental venue may need a durable baseline setup that can be adjusted periodically as the fleet is used by different customers.
Suspension adjustment also gives distributors a useful product feature to communicate. It demonstrates that the motorcycle is intended for riders who want to refine performance rather than simply use the motorcycle for casual transportation. It supports the FR2000’s positioning as an advanced technical riding platform.
The FR2000 uses 21-inch front and 21-inch rear trials tires. This consistent wheel configuration is designed to support obstacle riding and off-road terrain. The large-diameter wheels can help the motorcycle roll over irregular surfaces, maintain a stable contact path, and approach rocks, steps, and ruts with greater confidence.
Deep-tread trials tires provide traction on a range of off-road surfaces. Tire performance naturally depends on tread design, rubber compound, air pressure, terrain, temperature, and rider technique, but the intended configuration is focused on controlled off-road operation rather than road-speed handling.
The 21-inch front and rear arrangement distinguishes the FR2000 from many conventional dirt bikes that use a larger front wheel and a smaller rear wheel. A matched trials wheel setup supports the specialized requirements of technical riding and helps maintain a consistent response over obstacles. It also gives the motorcycle a distinctive product identity for distributors and riding facilities.
For fleet operators, tires should be inspected frequently for cuts, sidewall damage, abnormal wear, and changes in pressure. Trials riding can place unusual loads on the tire carcass and sidewalls, especially when riders climb sharp rocks or repeatedly practice on artificial obstacles. Proper tire maintenance is essential to preserve predictable steering and traction.
The motorcycle is equipped with front and rear hydraulic disc brakes. Hydraulic braking provides controlled braking force and allows the rider to manage speed precisely during technical sections. This is important when the motorcycle is approaching a downhill step, balancing on a slope, or preparing for a tight turn.
Front and rear brake control also helps riders develop advanced skills. A rider may use the rear brake to control the motorcycle during a descent or to manage rear-wheel movement, while the front brake can provide precise speed reduction when the terrain and body position allow. Training programs can use the braking system to teach separate brake control, weight transfer, and safe obstacle approaches.
Hydraulic disc brakes are also practical for commercial riding venues because they offer a familiar control system and can be inspected through standard maintenance procedures. Brake fluid condition, pad wear, rotor condition, lever feel, and caliper operation should be checked according to the usage schedule recommended for the final configuration.
Compared with simpler braking systems, hydraulic disc brakes provide a stronger technical foundation for advanced riding. They also contribute to customer confidence when the motorcycle is used on slopes, constructed obstacle courses, or demanding mountain terrain.
The FR2000 includes both electric start and kick start. This dual starting system is valuable in off-road environments where battery condition, temperature, riding frequency, and operating conditions can vary.
Electric start provides convenience for training centers, rental venues, and riders who need to restart the motorcycle repeatedly during practice. It can reduce the effort required when the motorcycle stalls on a slope or after a slow-speed maneuver. For commercial use, easy starting can improve customer experience and reduce the time instructors or staff spend assisting riders.
Kick start provides a mechanical backup and an additional starting method. It can be useful when the battery is low or when the motorcycle is being used far from workshop facilities. Offering both systems gives the FR2000 greater operating flexibility than a motorcycle that depends on only one starting method.
Buyers should confirm battery specifications, electrical configuration, starter components, and market-specific equipment before placing an order. These details may vary according to the selected engine version and destination market.

150cc/190cc Gas Trials Bike for Advanced Riders FR2000
| Item | FR2000 Configuration | Application Value |
|---|---|---|
| Product type | Gasoline-powered trials motorcycle | Advanced technical riding, training, clubs, and commercial venues |
| Engine options | 150cc or 190cc single-cylinder four-stroke air-cooled | Choice between manageable output and stronger low-speed torque |
| Transmission | Five-speed | Flexible control across slow obstacles and connecting sections |
| Starting system | Electric start and kick start | Convenience with mechanical backup capability |
| Front suspension | Fastace adjustable front fork | Adaptation to rider weight and terrain conditions |
| Rear suspension | Center monoshock | Compact layout and controlled rear-wheel response |
| Wheels and tires | 21-inch front and 21-inch rear trials tires | Obstacle handling and off-road traction |
| Brakes | Front and rear hydraulic disc brakes | Controlled braking for slopes and technical sections |
| Frame | Lightweight high-strength steel tube frame | Strength, serviceability, and off-road durability |
| Electrical and fuel connectors | IPX6 sealed connectors according to supplied configuration | Improved protection for demanding outdoor operation |
| Protective equipment | Skid plate, hand guards, heat protection, enclosed chain guard | Additional protection for rider and motorcycle components |
| Certifications | ISO9001, CE, EPA, DOT, and COC subject to market and configuration | Support for international purchasing and market evaluation |
The FR2000 should be compared with motorcycles according to intended use rather than engine size alone. A general-purpose dirt bike may be suitable for open trails, jumps, or higher-speed riding, but it may not deliver the same balance and control characteristics required for technical trials work.
The first advantage is the specialized wheel configuration. Matching 21-inch front and rear trials tires provide a consistent platform for obstacle riding. The second advantage is the short chassis, which supports tight maneuvering and rider repositioning. The third advantage is the low-speed engine setup, designed to make power management more useful in technical sections.
The adjustable suspension is another important distinction. A fixed suspension system may limit the ability of a training center or club to adapt the motorcycle to different riders and terrain. The FR2000 provides a foundation for adjustment and setup development, allowing the motorcycle to serve a wider range of applications.
The protective equipment also adds value. Skid plates, hand guards, heat protection, and an enclosed chain guard are particularly relevant in repeated obstacle riding. These components do not eliminate the need for maintenance, but they can provide an additional layer of protection in environments where contact with rocks and structures is expected.
The dual starting system and hydraulic braking package further strengthen the motorcycle’s practical value. These features support repeated training sessions and give riders greater control during slow-speed work. Together, the specifications create a more complete trials-oriented package than a basic motorcycle adapted for occasional off-road use.
The product’s value depends not only on its technical specifications but also on the manufacturer’s ability to produce consistently. Zhejiang Kukaqi Industry & Trade Co., Ltd. operates as a Chinese factory and exporter of gas and electric dirt bikes, ATVs, and trials bikes. The company provides OEM and ODM services for dealers, distributors, importers, training organizations, and other B2B customers.
The company’s stated production base includes more than 60,000 square meters of factory space, approximately 220 experienced staff, and a professional test track. These resources support the development, assembly, testing, and inspection of off-road motorcycles. A dedicated test track is especially relevant to trials and dirt-bike manufacturing because motorcycles need to be evaluated under dynamic conditions rather than only inspected while stationary.
The manufacturer maintains vertically integrated capabilities for important production stages. Frames and plastic body components are manufactured in-house, while powder coating, assembly, testing, and quality inspection are also included within the production operation. Internal production of key components can improve communication between engineering, manufacturing, and quality teams.
Frame production is particularly important for the FR2000 because the steel tube frame is a core structural component. In-house frame manufacturing can support control over tube preparation, welding, alignment, fixture use, surface treatment, and inspection procedures. Correct frame alignment affects steering behavior, suspension response, chain alignment, and overall riding stability.
In-house plastic body production can also improve design flexibility. OEM customers may require different colors, graphics, logos, number plates, or body-panel specifications. A manufacturer with internal capability can coordinate body production with assembly and branding requirements more efficiently than a company that relies entirely on unrelated external suppliers.
Powder coating provides a durable surface finish for suitable metal components. In off-road use, the coating must withstand dirt, moisture, vibration, and contact with outdoor conditions. Surface preparation and curing control remain essential, but an integrated powder-coating process can help maintain consistent appearance and protection across production batches.
Assembly and quality inspection are conducted as part of the manufacturing process. Every motorcycle is stated to undergo end-to-end quality inspections and dynamic performance validation. These activities can include checks of fasteners, controls, brakes, suspension, electrical systems, starting operation, engine performance, wheel alignment, and general vehicle condition. The exact inspection checklist should be confirmed with the supplier for each order.
For importers and distributors, quality control is not limited to the condition of one sample motorcycle. It also involves production consistency, documentation, packaging, spare parts, delivery schedules, and the supplier’s ability to support future orders.
The FR2000 is produced within a manufacturing system that includes component production, assembly, testing, and inspection. This provides a foundation for repeatable supply. B2B customers can request pre-production samples, inspection standards, packaging details, parts lists, manuals, and configuration confirmation before approving a larger order.
The stated IPX6 sealed electrical and fuel connector specification can be relevant for outdoor use. Sealed connectors may help reduce exposure to water and dirt, although protection depends on the complete electrical system, correct assembly, connector condition, and maintenance. Buyers should verify exactly which connectors are covered and whether the stated protection applies to the selected configuration.
Certifications listed for the product include ISO9001, CE, EPA, DOT, and COC, subject to market and configuration. These certifications and conformity documents are not automatically applicable to every destination or every engine configuration. Importers should identify the legal requirements of the target market and confirm the correct documentation before shipment.
A professional purchasing process should also establish responsibility for pre-delivery inspection, assembly after unpacking, warranty handling, technical support, replacement parts, and local compliance. These details are especially important for commercial fleets, where service downtime can affect customer bookings and operating revenue.
The FR2000 can be customized for different training, club, rental, distribution, and commercial riding applications. OEM and ODM services may include the selection of 150cc or 190cc engine configuration, speed-limitation settings, suspension and braking specifications, body colors, graphics, customer logos, vehicle numbers, packaging, labels, and manuals.
Training centers may require a controlled speed configuration for beginner or intermediate programs. A commercial obstacle park may need fleet identification through vehicle numbers and durable graphics. A distributor may request private-label packaging and manuals for its own sales network. A rental company may prioritize reinforced components, protective equipment, and easy-to-maintain specifications.
Additional reinforcement can be discussed for footrests, wheels, frame sections, and skid plates. Extra hand guards and protective components may be suitable for high-frequency use. However, every modification should be evaluated for its effect on weight, handling, maintenance, and regulatory compliance.
Customization should be finalized through a written technical specification. The document should define engine displacement, transmission, electrical equipment, brakes, tires, colors, logos, packaging, spare parts, documents, inspection requirements, and delivery schedule. This reduces the risk of misunderstandings between the buyer and manufacturer.
For larger orders, customization can create a clear product identity and help the buyer differentiate the motorcycle in the local market. It can also support fleet management by making each motorcycle easier to identify and assign to a customer, instructor, or maintenance record.
The FR2000 is well suited to professional training centers that teach balance, clutch control, body positioning, braking, throttle modulation, and obstacle negotiation. Instructors can create progressive exercises that begin with low-speed balance and tight turns before advancing to steps, rocks, slopes, and rear-wheel techniques.
The 150cc version can be used where a controlled and manageable power level is preferred. The 190cc version can be assigned to advanced riders or used on more demanding terrain. Maintaining both versions within one training fleet can allow instructors to match the motorcycle to the rider’s development stage.
Off-road clubs can use the FR2000 for organized practice, technical events, demonstrations, and club-level competitions. Its trials-focused layout gives riders a platform for developing techniques that are not easily practiced on a conventional trail motorcycle.
Mountain camps and commercial riding venues can use the motorcycle as part of a guided experience. The electric start, protective equipment, hydraulic brakes, and available customization options are practical features for a venue that must manage multiple customers and repeated operating cycles.
Farm and mountain sites may also use the FR2000 for low-speed off-road mobility where maneuverability is more important than high-speed transport. Operators should still assess local regulations, terrain risks, rider training, and whether the motorcycle is approved for the intended use.
A commercial fleet requires a maintenance program that is more structured than occasional private use. Operators should establish daily, weekly, and periodic inspection procedures based on riding hours, terrain, and customer usage.
Before each session, staff should inspect tire pressure, tire damage, brake operation, throttle return, clutch operation, chain condition, fasteners, hand guards, skid plate, controls, and visible leaks. The engine should be checked for proper starting and abnormal noise. After demanding operation, staff should remove accumulated mud and inspect areas where stones or branches may have caused damage.
Chain tension and lubrication are particularly important in trials riding because the rear wheel may experience repeated loading and unloading. Brake pads and discs should be inspected regularly. Suspension seals should be checked for oil leakage, while spokes, wheel bearings, steering bearings, and footrest mounts should be included in periodic service.
Fleet operators should maintain records for each motorcycle. A basic record can include vehicle number, engine hours, service date, parts replaced, reported rider issues, and next inspection date. These records can improve reliability and help identify repeated problems related to terrain, rider behavior, or operating procedures.
Spare-parts planning should be discussed before purchase. Common fleet parts may include brake pads, levers, cables or hydraulic components, filters, chains, sprockets, tires, tubes, plastics, hand guards, footrests, electrical components, and suspension service parts. The manufacturer can provide a recommended spare-parts list according to the order quantity and application.
The standard model MOQ is stated as beginning from one unit, which allows buyers to evaluate the FR2000 before committing to a larger fleet. Bulk order pricing is available for orders of 50 units or more. This structure can support different purchasing strategies, including sample evaluation, dealer introduction, pilot fleet development, and larger distribution programs.
The standard lead time is stated as 7 to 15 days, subject to stock and order quantity. Buyers should confirm the actual production schedule, configuration availability, inspection time, packaging requirements, and shipping arrangements before placing an order.
FOB, CIF, and EXW trade terms are available for discussion. Overseas warehouse fulfillment and container shipping can also be discussed according to the destination and order size. Importers should calculate total landed cost, including freight, insurance, customs duties, port charges, inland transportation, assembly, certification, and after-sales support.
The stated annual production capacity is over 20,000 units. Capacity information can be useful when evaluating a long-term supplier, but the buyer should still confirm current production schedules, available production slots, component lead times, and the manufacturer’s ability to maintain the requested specification.
A complete quotation should identify the engine version, color, graphics, packaging, included accessories, certification documents, warranty terms, payment terms, trade term, delivery port, lead time, and inspection arrangements. Clear documentation is particularly important when the buyer is ordering a customized version.
The FR2000 offers several features that support wholesale and commercial applications. First, it is a specialized product rather than a generic dirt bike. This gives distributors access to a distinct market segment involving trials training, technical riding, clubs, obstacle parks, and advanced recreational use.
Second, the two engine options make it possible to create a product range without changing the overall platform. The 150cc model can serve riders who want a manageable technical motorcycle, while the 190cc model can address customers seeking stronger low-speed performance.
Third, the motorcycle includes features that are meaningful in real operating environments: adjustable suspension, hydraulic brakes, dual starting, 21-inch trials tires, protective components, and a short chassis. These features can be communicated clearly to customers and instructors without relying only on cosmetic marketing.
Fourth, OEM and ODM customization enables distributors and venues to develop a differentiated product identity. Graphics, logos, colors, numbers, packaging, manuals, and fleet specifications can all support a more professional market presence.
Finally, the manufacturer’s integrated production capabilities support product development and supply coordination. In-house frame and plastic production, powder coating, assembly, testing, and inspection provide a stronger manufacturing foundation than a trading-only supply model. Buyers should still conduct due diligence, but the production structure is relevant when evaluating supplier reliability.
Trials riding requires skill and protective equipment. Riders should use an approved helmet, eye protection, gloves, boots, protective clothing, and suitable body protection. Training should begin in a controlled area under the supervision of an experienced instructor.
The motorcycle should be used only on terrain appropriate for the rider’s ability and the motorcycle’s configuration. Steep slopes, large steps, wet rocks, loose ground, and artificial obstacles can create significant hazards. Riders should inspect the practice area and remove unnecessary hazards before training.
Commercial venues should establish operating rules, rider briefings, supervision procedures, emergency plans, and maintenance checks. Speed limitation may be discussed for training fleets, but the specific limitation range must be confirmed according to the final vehicle configuration and local regulations.
Correct setup is also part of safety. Tire pressure, suspension settings, brake adjustment, chain tension, handlebar position, and control operation should be checked before riding. Any damaged protective component or control part should be repaired or replaced before the motorcycle returns to service.
The FR2000 is designed for advanced trials riding, technical obstacle training, professional off-road clubs, mountain camps, training centers, commercial riding venues, and selected low-speed off-road applications. It is focused on balance, control, traction management, and obstacle riding rather than high-speed motocross performance.
The motorcycle is available with a 150cc or 190cc single-cylinder four-stroke air-cooled engine. The 150cc option provides a manageable platform for advanced training and recreational use, while the 190cc option offers a larger displacement platform with additional low-speed torque potential.
Yes. The stated configuration uses a five-speed transmission. It also includes a lightweight hydraulic clutch to help riders manage power delivery during slow-speed technical riding.
The FR2000 is primarily positioned for advanced riders and structured training programs. A beginner may use it only under appropriate supervision, with suitable speed control, protective equipment, and a progressive training plan. The final suitability depends on rider size, experience, local terrain, and instructor judgment.
Yes. Its low-speed power setup, adjustable suspension, hydraulic braking, dual starting system, and protective equipment make it suitable for professional training environments. Training centers can also discuss speed limitation, fleet graphics, vehicle numbering, reinforced components, and customized manuals.
The FR2000 uses a Fastace adjustable front fork and a center rear monoshock. Suspension settings should be adapted to rider weight, terrain, tire pressure, riding style, and obstacle requirements.
The 21-inch front and rear trials setup is intended to support obstacle riding and off-road terrain. The larger, consistent wheel configuration can help the motorcycle roll over irregular surfaces and maintain predictable behavior during technical riding.
Yes. The motorcycle uses front and rear hydraulic disc brakes. This provides controlled braking for slow-speed balance work, downhill sections, obstacle approaches, and general off-road operation.
The stated configuration includes a full-coverage skid plate, hand guards, engine heat protection, and a fully enclosed chain guard. Buyers should confirm the exact equipment list for the selected configuration and destination market.
Yes. OEM and ODM customization can include engine displacement, speed limitation, suspension and braking configuration, colors, graphics, logos, vehicle numbers, reinforced parts, protective components, packaging, labels, manuals, and fleet requirements.
The listed certifications include ISO9001, CE, EPA, DOT, and COC, subject to market and configuration. Buyers must confirm which documents apply to their selected engine version and destination market before ordering.
The standard model MOQ is stated as from one unit. Bulk order pricing is available for orders of 50 units or more. Custom specifications may require different quantity, tooling, packaging, or production conditions.
The standard lead time is stated as 7 to 15 days, subject to stock and order quantity. Customized orders may require additional time for graphics, packaging, special components, certification, or production scheduling.
Yes. FOB, CIF, and EXW terms are available for discussion. Overseas warehouse fulfillment and container shipping may also be considered according to destination, quantity, and commercial requirements.
Buyers should confirm engine displacement, quantity, transmission configuration, application, customization requirements, target market, certifications, packaging, delivery schedule, trade terms, spare parts, warranty conditions, and inspection arrangements before requesting a final quotation.
The FR2000 150cc/190cc Gas Trials Bike for Advanced Riders is a purpose-oriented motorcycle for technical off-road riding. Its value comes from the interaction of its low-speed power options, five-speed transmission, hydraulic clutch, adjustable Fastace front fork, center monoshock, 21-inch front and rear trials tires, hydraulic disc brakes, dual starting system, short chassis, and protective equipment.
For advanced riders, the motorcycle provides a platform for practicing balance, obstacle negotiation, clutch control, braking, rear-wheel techniques, and low-speed precision. For training centers, clubs, mountain camps, rental operators, and distributors, it offers a practical base for fleet development and product customization.
The manufacturing structure behind the motorcycle is also important. Zhejiang Kukaqi Industry & Trade Co., Ltd. combines factory production, in-house frame and plastic component manufacturing, powder coating, assembly, testing, quality inspection, OEM and ODM support, and international supply experience. These capabilities can help B2B buyers develop a more consistent product program and respond to different market requirements.
By offering both 150cc and 190cc versions, the FR2000 can serve different rider levels and commercial applications while maintaining a common trials-focused identity. With suitable configuration confirmation, inspection, maintenance, training, and regulatory review, it can be positioned as a specialized product for the growing market of technical off-road riding.
1. Product technical specification sheet for the FR2000 150cc/190cc Gas Trials Bike for Advanced Riders.
2. Manufacturer-provided product information concerning engine options, suspension, braking, wheels, protective equipment, customization, and B2B purchasing.
3. Manufacturer profile and production information for Zhejiang Kukaqi Industry & Trade Co., Ltd. and the Xmotos off-road motorcycle brand.
4. General principles of motorcycle chassis design, suspension adjustment, hydraulic braking, tire maintenance, and off-road vehicle inspection.
5. General safety practices for trials riding, motorcycle training centers, commercial riding venues, and off-road fleet operations.